SIGHT-PIPE 404 Horz Zoom 574-256-5500

DAVE JONES MACHINISTS 1815 N. CEDAR ST., MISHAWAKA, IN 46545 PHONE/FAX: 574-256-5500

404 Series Horizontal "ZOOM" Stand

YOU ARE HERE > HOME > PRODUCTS > MEASURING STANDS > 404 Horizontal STAND

The 404 Series Horizontal Zoom Stand system uses a variable or "Zoom" lens system to allow inspectors a wide range of magnification settings to view internal defects both large and very small. An inspector can quickly scan larger areas of the internal surfaces or boost the magnification for smaller very specific areas or questionable areas seen at a smaller magnification.

The stand system shown here uses an optional rotating SIGHT-PIPE Assembly enabling a 360 degree view of the part without having to rotate the part in the fixture. This option, when coupled with a dual path illumination assembly produces the best angled views and images of burrs in crossholes which intersect a main bore. The dual path fiber optic illumination Assembly provides the means to independently vary the intensity of light to either the SIGHT-PIPE Assembly and/or the backlight assembly through the part. By varying the intensity of each of the two light paths and rotating the SIGHT-PIPE assembly an inspector can make the best inspection possible quickly and easily.

The 404 also uses an adjustable table height mechanism and precision linear bearings to provide a smooth traveling, flexible piece part nest that can host a family of parts.

The vertical black and white images at the far right are all images of the same piece part bore area with adjustments made in either the dual illumination paths, Zoom magnification, or rotation of the SIGHT-PIPE. More>